All India Machinery - Two Colour Flexo Printing Machine Manufacturer

Two Colour Flexo Printing Machine

Models : Two Colour Flexo Machine

Features of Two Colour Flexographic Printing Machine:

Easy operation with two colour flexographic machine, flexible starting, accurate color register.
The meter counter can set printing quantity according to the requirements.
The printing ink is spread by the anilox cylinder with even ink color.
Reliable drying system coordinated with high-speed rotation, it will automatically break
Circuit when the machine stops.
Ac Drive motor to control speed & adapts to different printing speeds.
Sensor to stop the machine automatically when the material is cut off. /li>

Two Colour Flexo Machine Technical Specifications :

1. Machine Main Parameter
Model Flexographic Machine	2600	2800	21000
Machine Colors	2 Color
Max. printing material width	650mm	850mm	1050mm
Max. printing width	560mm	760mm	960mm
Max. Printing length(repeat)	7.5"~40"(190mm~1000mm)
Max. Mechanical speed	80m/min
Max. Printing speed	50m/min
Register Precision	Crosswise: ±0.25mm Lengthwise: ±0.25mm (Register precision no change during this machine speed up or down)
Thickness of Plate	Photopolymer plate 2.84mm
1 set of Printing Cylinder on this Machine	400mm
Total machine power	8kw	10kw	12kw
Power	Voltage 415V

2. Machine Detailed Configuration
2.1 Single Unwind Unit
Max. Length of Roller	650mm	850mm	1050mm
Max. unwind diameter	?800mm
Unwind Magnetism device	5 Kg
Tension precision	±0.3kg
Unwind web cylinder	?76mm (inner diameter)

2.2 Traction Unit
Constitution of Traction	Aluminum roller, Chrome plated roller
Traction Zones	2 Zones, unwind and rewind part
Bearing	SKF (Japan)

2.3 Printing Unit
Type	Stack Type
Machine Colors	2 Color
Principle of Work	Gears Drive
Suitable Ink	Solvent Based ink
Printing Plate	Photo Polymer or Rubber
Constitution of Printing	Anilox roller, Rubber roller, Chrome plated roller, Printing cylinder, Resin version
Anilox roller	Steel Anilox roller (300LPI)
Rubber roller (Ink transfer)	1 Set (2 pcs)
Printing Pressure	Mechanical adjust
Adjusting of Register	By Manual (Automatic printing after beforehand overprint. When start machine, no need register color again.)

2.4 Heating and Drying Unit
Dryer on each color	Electrical heat drying
Blower	2 HP – Air Dyer 2pcs
Blower of nature wind	1kw x 2pcs
Electrical drying power	3 kw (it is special with double surface blowing, wind cooling circulate, drying fast, also with high speed drying for fastness)

2.5 Electrical Parts
Master motor	3.5Kw
The inverter	2.8Kw
Auto tension control	Auto control when machine stop; Auto stop machine when material is cut off
Electronic control system	Operation control panel 1pcs